Scroll to Content

One of the most common issues car owners face relate to tyres. As the part of the vehicle that comes into contact with the road, tyre problems are to be expected. However, most can be avoided. Here are common tyre problems car owners’ face with possible solutions:

Inflation Problems

The air pressure inside the tyre has to be just right to drive safely on the road. Under-inflation or over-inflation are well-known tyre problems vehicle owners frequently encounter. Under-inflation occurs when the air pressure inside the tyre is too low. An under-inflated tyre may physically look flat. Your fingers can easily sink into the rubber of the tyre with this issue. Under-inflated tyres make your car’s engine work harder, thus consuming more fuel.

On the other side of this problem is over-inflation. An over-inflated tyre has too much pressure inside, and may even burst under strain. When you press down on an over-inflated tyre, it will feel extremely rigid. Both under-inflated and over-inflated tyres may have blurry or strained looking treads

A properly inflated tyre would show the treads intact. Car owners can accurately check tyre pressure using either a pressure gauge or a tire pressure monitoring sensor, which should be installed into the car. Find a great local car service Perth to routinely check your tyres for persisting pressure problems. You should also refer to the vehicle owner’s manual for the right tyre pressure best suited for the vehicle model.

Tread Wear

Roadworthy tyres must have proper tread depth. There are legal requirements for the tyre treads to remain largely intact in Australia. Some tread wear is visible. Sometimes it’s not. In that case, you can do the coin test to check if the tread has worn out. Put a penny coin between the treads. If the outer rim is visible, then the treads are dangerously close to being illegally worm out.

There are actually different types of tread wear in vehicles. Severe tread wear where the treads are barely visible is illegal wear that requires immediate replacement. Sometimes the tyre treads are unevenly worn out. Parts of the tyre may have the treads intact while the treads are worn out in others. This is caused by wheel misalignment.

If the wear is visible only on the edges of the tyres, then that’s tread wear caused by an improperly fitted tyre or a wheel. Tread wear can also be isolated, which is caused by hard brakes, such as emergency brakes.

The solution to tread wear depends on the type and extent of the wear. Wheel alignment on a recommended schedule can prevent uneven wear. Tires with extreme wear of any kind need to be replaced right away. Check in with a local auto mechanic and see which solution is best suited for your vehicle.

Physical Damage

Physical damage to tyres isn’t necessarily avoidable. It can happen if the tyres are driven over sharp objects like nails or glass. Tyres can get impact damage as well, when driving at high speeds causes the wheels to bump against things on the road.

If the tyres are physically damaged in any way, you will need to replace them without delay. Keep an extra tyre in your car just in case for emergencies.

You can protect your tyres and maintain their longevity with proper care, maintenance, and driving habits. Good riving discipline and avoiding hard braking will protect your tyres from preventable damage. Refer to the above points to make sure your vehicle’s tyres are always roadworthy.

Please follow and like us:

Written by:

Leave a Comment

Your email address will not be published. Required fields are marked *